Changes in Evaluation Guidelines or BRLs 2021

Concept BRL’s 2020-1 en 2020-2 published for comments

On December 22, 2021 Kiwa publishes the Draft Evaluation Guidelines BRL 2020-1 and BRL 2020-2 d.d. 21 december 2021; TPE pipe joint seals for non-pressure waste water and drainage – MATERIAL & SEALS, for comments.

Read the full story

BRL-K14010-1, Part A and Part B published binding

Kiwa attest-with-product certificate for: Kiwa technical-approval-with product certificate for physical techniques

BRL-K656 published binding

As of August 16, 2021 a revised version of the Evaluation Guideline BRL-K656 is published binding. BRL-K656 contains the requirements for a product certificate “Heat exchangers intended for the indirect adjustment of drinking water”.

BRL-K602 published for comments

Kiwa product certificate for valves for drinking water transport and drinking water distribution systems. BRL-K602 embodies references to the norm parts EN1074, part 1 up to and including part 5.

BRL-K630 published for comments

BRLK630 bevat de eisen en bepalingsmethoden voor het Kiwa Watermark productcertificaat. De commentaarperiode loopt tot 30 september 2021.

BRL-2006 published for comments

BRL-2006 for “PE pipes and fittings for indoor sewerage under free decay”. BRL-2006 version 24-06-2021 has been published for comments until 02-09-2021 and will replace the version with the date 14-09-2017. This BRL has been prepared by de Board of Experts – LSK.

BRL-K14016 is withdrawn

BRL-K14016 is withdrawn per 1 January 2021. The HC is a components in sanitary bath-mixers and is tested with the diverter of the bath mixer. For the other models there are more practical solutions available.